Motion Detection Sensors By Quick Sense

• Good solution for energy saving & easy in installation. & Delay adjustment: 10 Seconds - 7 Minutes & Adjustable Lux: turn on the lights during the day or night.
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights .
• Sensitivity Adjustable: Turn On Lights during Day or nights.
• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance

• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
• Sensitivity Adjustable: Turn On Lights during Day or nights
• Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights

• Customer Care Ph/Wapp: 9560248290 Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamp, LED lights. If you have any query fell free to contact us. Quick Sense Innovations Official site . www.Quicksense.in packing is tested before dispatched so that the item reaches to the buyer safely and undamaged.
• Working : As shown in the above diagram out of three wire's Red : Load, Blue : Neutral & Brown : Phase. Connect Red & Blue to Load Application where using (i.e. Lighting) & Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep torch over to the Photocell load will turn ON.
• Light turn on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual
• Capacity : 1000 watts,wide light sensor/ best use for outdoor usage

• Product Size : 5.5 x4x 2.5 cm Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux)
• 18 Months Mfg Warranty
• Detection angle: 360/ Rated load: 1200Watt/Ideal installation height: 2 - 4 m. HF system : 5.8GHz CW radar,ISM band, Connection Point: L:- Phase/Line, N - Neutral i.e. (commaon for Both I/p and O/p) and L':- Load/to light
• This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily
• Package Content- Microwave Motion Sensor with Light Sensor (White)(Pack of 2 )

• With the quick sense (Qs-WR02) Infrared Sensor Operated Door for Cabinet, you'll never have to worry about forgetting to close your cupboard or cabinet door again! This handy gadget is fitted with an infrared sensor that detects a load placed on top of it and closes the door, saving you from the hassle of having to reach up high after you've already put away your items.
• Rated Current 5 Amps and you can connect with lighting type of load
• Comes with a complete white color that blends in with any furniture style. Comes with 24 months warranty against manufacturing defects. And product life : 8-9 years.
• Cabinet door opener with IR detector automatic opening and closing for living room, kitchen, bathroom etc. It has been designed to provide a more convenient experience in opening and closing doors, easily installed by two screws, makes a great addition to any home
• IR sensor switch is suitable for use on any automatic cabinet door closer. The sensor works with lighting loads up to 200 Watts and provides a rated load of 5 Amps at 220-240 Volt, 50/60 Hz.. It can be used in the range of 5-6 cm distance from both sides of door.

• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
• Sensitivity adjustable: turn on lights during day or nights
• Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights

• This Hotter can connect directly 230V AC
• Sound level:118 dB at 1 Meter Distance (at 12V )
• This is a fixed sound alarm used in security alarms like police siren
• Hooter can not tuned to change sound And .Not Capable with motion sensor
• The alarm covers range a of 200 meters around it. It is essential for your safety to be aware and here we have an alarm for you to be safe from complicated situations & emergencies.

• Fully automatic switching on and off operation
• Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamp, LED lights. If you have any query fell free to contact us
• Working : As shown in the above diagram out of three wire's Red : Load, Blue : Neutral and Brown : Phase. Connect Red and Blue to Load Application where using (i.e. Lighting) and Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep torch over to the Photocell load will turn on

• Good solution for energy saving & easy in installation. & Delay adjustment: 10 Seconds - 7 Minutes & Adjustable Lux: turn on the lights during the day or night.
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights .
• Sensitivity Adjustable: Turn On Lights during Day or nights.
• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance

• Automatic Induction. The light will be activated ON/OFF by auto PIR motion detection (Infrared sensing of Humans or Animals)
• PIR Sensor: Sensor function, Triggered by motion, you can use this small motion sensor switch to control Camera,Automatic,Electric equipment or LED lighting like Led strip lighting. Timing setting from 15s to 360s
• With light Sensor (Use at night or in dark light); Without light sensor (Used by day and night)
• PIR Sensor: Sensor function, Triggered by motion, you can use this small motion sensor switch to control Camera,Automatic,Electric equipment or LED lighting like Led strip lighting. When it is powered for the first time, the switch will be \"ON\" for self-test, it needs to leave its sensing range for 15 sec.
• Standard 5.5*2.1mm DC Plug Connetor (If you do not have a standard DC connector then you can also use the DC conversion connector to connect this product, So we do not recommend cutting the connector when it is not necessary)

• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
• Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamp, LED lights. If you have any query fell free to contact us
• Sensitivity Adjustable: Turn On Lights during Day or nights
• Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night

• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
• Through the photosensitive control, it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights
• Using the automatic control product of infrared technology, when people walk into the sensor range, and the sensor can detect the spectral change of the human body infrared ray, during this time, the switch will connect the load automatically until the person leaves the sensor range
• Solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
• Sensitivity adjustable: turn on lights during day or nights

• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
• Good solution for energy saving and easy in installation. and delay adjustment: 10 seconds - 7 minutes and adjustable lux: turn on the lights during the day or night
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights
• Sensitivity adjustable: turn on lights during day or nights
• When temperature decrease range increase and Temperature increase range decreases The product range work exactly at 24c

• Has 18 months warranty
• Has 2 Pieces Pack
• Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights
• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance

• Product Size : 5.5 x4x 2.5 cm Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux)
• 18 Months Mfg Warranty
• Detection angle: 360/ Rated load: 1200Watt/Ideal installation height: 2 - 4 m. HF system : 5.8GHz CW radar,ISM band, Connection Point: L:- Phase/Line, N - Neutral i.e. (commaon for Both I/p and O/p) and L':- Load/to light
• This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily

• Power Supply Voltage: DC12-24V
• Delay Time: 1-10 min(adjustable). Induction distance: 8m
• Infrared detection controller, adopt infrared detection way to control load switch
• The sensor switch activates On when a body in motion enters the field of view with an On time hold that is adjustable from 1 to 10 minutes after motion has ceased
• PIR (Passive Infrared) sensor has an effective range of 16 feet and diminished sensing of a moving human body to 26 feet. The field of view of the PIR Dome Lens is 60 degrees nominal.