Wall Putty By Dr. Fixit

• USP - Dr. Fixit Crack-X Shrinkfree fills cracks up to 10 cm is used for filling cracks in plastered surfaces because it is 100% shrink free & water resistant
• ONE TIME FILLER - Applied as one time filling (does not require second time application, as required in other acrylic sealants)
• FAST DRYING AND FLEXIBLE Dr Fixit Crack X Shrinkfree is fast drying & flexible with a very light weight & soft putty like appearance
• APPLICATION AREAS Excellent adhesion to cementitious surfaces like roofs, walls and floor prevents water leakages through the cracks. Non-sag nature helps in filling of vertical & overhead cracks
• HOW TO USE - Step 1 - Create a 5mm x 5mm grove using a chisel Step 2 -Clean the dust, plaster and loose pieces in the groove and wash with water Step 3 - Apply Crack X shrinkfree using a putty blade Step 4 - Wait for 4-5 hours to dry

• USP Dr Fixit Raincoat is a waterproofing and protective coating for exterior walls of the buildings or structures
• PROTECTION UPTO 7 YEARS Raincoat is a waterproofing & protective coating for the exterior walls of the building with gives a much needed protection for a period of up to 7 years
• WATER RESISTANCE It is water resistance and provides a protective coating for exterior walls of the building
• SUPREME FLEXIBILITY AND BREATHABILITY Raincoat's coating is known for its supreme flexibility, breathability

• Very tough yet elastic coatingbreathable, hence can be applied over damp surfaces
• Provides strongly bonded waterproof coating
• No dilution required, ready to use, brush applicable
• Tintable and can be used over painted surfacesPrevents Mildew, Fungal & bad odour
• Provides coverage of 20-27 sqFt./kg in 2 coats

• WATER RESISTANT - It has excellent water resistance with a quick adhesive tendency to concrete surfaces
• HOW TO USE 1) Use patra to remove the paint from the walls 2) remove the putty till you see the plaster of the wall 3)Use wire brush to clean the wall 4)Use brush to apply water on the wall 4)Mix Dr fixit dampguard in 1 unit water,1 unit base and 1 unit hardener ratio 6) Use a brush to apply Dr Fixit
• AREAS OF APPLICATION - Internal walls, ceilings, RCC water tanks

• Ready to use One component coating, easy to apply with Brush for mild dampness, patch repair & hairline cracks
• Quick Repair Fast drying time. Dries to the touch in 30 minutes, re-coat in 4 hours.
• Multipurpose Suitable for indoor & outdoor application
• No dilution required, ready to use, brush applicable. Tintable and can be used over painted surfaces
• Moisture cure technology - Cures effectively even in damp condition

• Type of Product : Acrylic Coating.
• Coverage : 810 m?/ltr/ coat.
• Pack Size : 1L
• Color : White

• QUICK DRYING Crack X Paste is quick drying after applying the 2nd coat in 2 hours